Description
Shelly Plus Uni
Small form factor smart universal module featuring two solid state relays with potential free contacts, pulse counter, analog and two digital inputs. It allows remote control of electrical devices via mobile phone, tablet, PC or home automation system. It can operate standalone on a local Wi-Fi network or it can also be controlled via cloud-based home automation services.
Shelly Plus Uni can be accessed, controlled, and monitored remotely from any place where the User has internet connectivity, as long as the device is connected to a Wi-Fi router and the Internet.
Shelly Plus Uni has an embedded Web Interface which can be used to monitor and control the device, as well as adjust its settings.
Inputs
- 1 analog input - ANALOG IN
- 1 1-Wire data input - DATA
- 1 pulse counter input - COUNT IN
- 2 digital inputs - IN1 and IN2
Outputs
- 2 potential-free contacts solid-state relay outputs - OUT1 and OUT2
- 1 sensors power supply output - SENSOR VCC Adventure friendly
Shelly Uni works on 12 to 36 VDC, making it perfect for the automation of your camper and its appliances! Use the analog input to measure your camper batteries and receive an instant notification to your phone if they're running low. Together with other Shelly devices, you can turn off connected appliances to take further action and save power. Additionally, you can use its binary inputs to detect if a door has been opened and be alerted of a potential break-in while you're away.
Full compatibility
Shelly devices are compatible with Alexa, Google Home, Android and iOS. Together with the voice assistant, you can command Shelly devices using just your voice!
Technical Data
PCB size (LxWxH) | 40x21x7 mm |
Weight | 8.5 g (with the cables) |
Ambient temperature | -20 °C to 40 °C |
Humidity | 30 % to 70 % RH |
Power supply | 8-24 VAC, 9-28 VDC, 5 VDC (stabilized, via +5 VDC and GND) |
Power consumption | < 1 W |
Digital inputs resistance | 50 kΩ |
Digital inputs triggering voltage | 1.5 V (active low level) |
Max switching voltage | 30 V |
Max switching current | 300 mA |
Voltmeter | 0-15 VDC / 0-30 VDC (Two-range) |
Pulse counter input triggering voltage | 1.5 V (active low level) |
Pulse counter max frequency | 1 kHz |
External sensors supported | Single DHT22 or up to five DS18B20 |
RF band | 2400 - 2495 MHz |
Max. RF power | <20 dBm |
Wi-Fi protocol | 802.11 b/g/n |
Wi-Fi Range | Up to 30 m / 100 ft indoors and 50 m / 160 ft outdoors (Depends on local conditions) |
Bluetooth Protocol | 4.2 |
Bluetooth Range | Up to 10 m / 33 ft indoors and 30 m / 100 ft outdoors (Depends on local conditions) |
CPU | ESP32 |
Flash | 4 MB |
Schedules | 20 |
Webhooks (URL actions) | 20 with 5 URLs per hook |
Scripting | Yes |
MQTT | Yes |
CoAP | No |
EAN | 3800235265710 |