Shelly DALI Dimmer Gen3
Control up to 5 DALI bus units
Description
Shelly DALI Dimmer (the Device) is a gateway device between Shelly ecosystem and APIs and a DALI network of lights. It can control DALI capable light sources that contain DALI control gear.
In terms of DALI it is a single-master application controller, supporting LED control gear (Part 207), which does not share the bus with other DALI control devices. Shelly DALI Dimmer controls all connected DALI control gear as a single group with broadcast messages.
The Device contains a bus power supply with possibility to control up to X non-powered bus units.
The Shelly DALI Dimmer can be accessed, controlled, and monitored remotely from any place where the User has internet connectivity, as long as it is connected to a Wi-Fi router and the Internet.
It has an embedded Web Interface which can be used to monitor and control the Device, as well as adjust its settings.
Some of features:
- DALI application controller: Supports DALI bus control in a single-master configuration of direct or indirect DALI control gear lights.
- DALI features: Control light intensity of attached control gear (DT6). Color temperature control is not supported.
- DALI power on default: off
- DALI on bus failure: turn on at 100%
- Night mode: Enables to set a specific brightness of input lights during nighttime.
- Weekly schedules: Supports daily schedules and routines, including setting of brightness, transition duration, and flip value of the dimming signal.
- Local actions: Allows creating automation scenarios within the local Wi-Fi network, including setting of brightness, transition duration, and flip value of the dimming signal.
- Webhooks: Support automation through lightweight, event-driven communication with other devices.
- Scripting: Allows creating automation scenarios through scripts.
Technical Data
| Size (HxWxD) | 42x37x17 mm / 1.65x1.46x0.66 in |
| Weight | 18 g / 0.63 oz |
| Screw terminals max torque | 0.4 Nm / 3.5 lbin |
| Conductor cross section | 0.5 to 1.5 mm² / 20 to 16 AWG (solid, stranded, and bootlace ferrules) |
| Conductor stripped length | 5 to 6 mm / 0.20 to 0.24 in |
| Mounting | In-wall, suspended ceilings |
| Shell material | Plastic |
| Shell color | Green |
| Ambient working temperature | -20 °C to 40 °C / -5 °F to 105 °F |
| Humidity | -20 °C to 40 °C / -5 °F to 105 °F |
| Max. altitude | 2000 m / 6562 ft |
| Power supply | 110 - 240 VAC ±10% 50/60Hz |
| Power consumption | < 2 W |
| Neutral not needed | No |
| Bus power supply | Guaranteed 10mA (up to 5 DALI control gear units), Short circuit current < 35 mA |
| Bus voltage | 16V nominal |
| Internal-temperature sensor | Yes |
| Wi-Fi Protocol | 802.11 b/g/n |
| RF band | 2401 - 2495 МHz |
| Max. RF power | < 20 dBm |
| Range | Up to 30 m / 100 ft indoors and 50 m / 160 ft outdoors (Depends on local conditions) |
| Bluetooth Protocol | 4.2 |
| RF band | 2400 - 2483.5 MHz |
| Max. RF power | < 4 dBm |
| Range | Up to 10 m / 33 ft indoors and 30 m / 100 ft outdoors (Depends on local conditions) |
| CPU | ESP32-C3 Shelly |
| Flash | 8 MB |
| Schedules | 20 |
| Webhooks (URL actions) | 20 with 5 URLs per hook |
| Scripting | Yes |
| MQTT | Yes |
| Encryption | Yes, TLS 1.2 |
| EAN | 3800235261866 |
