Mi-Light DMX512 Wireless Transmitter (FUTD01) uses the 2.4GHz ISM Frequency. This ensures fast, reliable data transmission. This will allow you to remotely control your 2.4G RF wireless LED lights, including LED light bulbs, from your DMX512 controller.

In fact, any single colour, warm white, cool white LEDs or RGBW LED Strip, LED Bulbs, LED Tape or Mi-Light product that has a 2.4GHz RF receiver will work with this excellent DMX LED product. The transmitter plugs into your DMX controller through a standard 3 pin XLR connector. It can control 16 groups of 5 channel RGB+CCT products (80 channels of DMX) at the same time.

The FUTD01 Mi-Light antenna is a device designed to work with DMX 512 devices. The transmitter works in the DMX 512 standard and can transmit the signal to individual controllers which can also be grouped together. The transmitter works with both Mi-Light devices such as FUTD02 and FUTD03 and allows for smooth adjustment of brightness, light colour, saturation and colour temperature of white light.

Together with the appropriate components, it will create an element of advanced lighting. In addition to the attractive design, the benefits of this product include low power consumption and optimal functionality. 2.4G communication ensures optimal range and transmission performance - no delay effect. Each group of communicating light sources / DMX controllers has the ability to adjust on a scale from 0 to 100% on each of the 5 channels (red, green, blue, warm white and cold white) This device can control up to 16 receivers/groups of receivers at the same time - 80 channels at a time. The source can display any shade of colour from the RGB palette and white from warm to neutral to cold - CCT, RGB + CCT. The software has extensive functions for lighting control, has a range of 16 million colours, adjustable white light and dimmer. You can set the defined modes of light operation as well as automatic changes of light to the rhythm of the music.

How to use the DMX Transmitter

To use your energy efficient wireless DMX transmitter:

• Connect the transmitter to the three-pin XLR output socket on your DMX LED controller
• Plug the USB power cable into a USB socket
• Setting the address
• Hold 'SET' until the on-screen display blinks
• Choose the address by pressing the '+' or '-' keys. There are a total of 512 addresses.
• After selecting the address, hold the 'SET' button again until the on-screen display stops blinking.
• For a further in-depth guide on using this stylish DMX product, please download our supplied datasheet.
• Compatible Mi-Light LED lighting is sold separately.