Lighting

Patio lights create an atmosphere and enhance safety, on the terrace, patio or stairs.

Installation of terrace lights

Step 1. Design and labeling

Before you start drilling, it is very important to plan the correct distance between the cover lights. This determines how many lights you need and the length of cable needed to connect them to the controller.

We recommend marking the locations of the patio lights on the patio and making sure that the lights come where you want them and that the distance between them is correct.

Step 2. Drilling

Now that the markings have been made and the installation locations have been secured, we recommend that you remove the boards on which you are drilling. This makes installation and cabling traction easier and you can also check that there are no other cables or pipes underneath. Remove the desired boards and drill the necessary holes in the markings.

Step 3. Install patio lights

Insert the patio lights and cables into the drilled holes and make sure the luminaire is firmly attached to the board. Make sure each cover light is on a chain.

Now that all the deck lights are on, you can put the patio boards back in their original places.